Battery: -
Cells: -
Cell -
Voltage
Battery: - °C
Cells: - °C
Cell -
Temperature
Battery: -
Cells: -
Resistance
100
90
80
70
60
50
40
30
20
10
0
Current [A]
Batt vtg. [V]
Cell vtgs. [V]
Temper. [°C]
SoC [%]
Plot
Power cycle #: _ Pwr-up time: _ s
Status: -    Power: -
_
Current: _ A SoC: _ %
Charge: _ Discharge: _
Charge limit: _ % Disch. limit: _ %
_ _
Balancing: _
_
Banks: _ Cells: _
_ _
Battery status
BMS: -
WiFi: -
Display status
Plot batt vtg.
10
20
50
100
200
500
1k
Plot batt curr.
10
20
50
100
200
500
1k
 
Low SoC Warn.:
-
  Fault:
-
 
Temper. °F:
Settings (local)
File:
 
Rate:
1 s
2 s
5 s
10 s
30 s
1 m
2 m
5 m
10m
 
Control:
Stopped
Log data
To access remotely the data shown on a display:
1) Connect that display to the Internet (either through a WiFi network or a cable)
2) Enable remote access in the Settings screen of that display
3) On this page, enter the serial number of that display
Privacy notice: Whenever Remote Access is enabled and that display is connected to the Internet, its data can be accessed remotely by anyone who has its serial number.
Safety notice: it is impossible to control the battery directly or remotely through this page.
Remote monitor
Remote monitor of Lithiumate Touchscreen display
Display: HDWR S/N - SFWR rev: -
BMS: HDWR rev_, S/N: _; SFWR rev: _
CopyRight Elithion 2017
Davide Andrea, 2017/09/17
Info
Tech support: elithion.com
Help

Elithion Lithiumate
Remote Monitor

 

Serial number:   Not found   Direct link for this display
Enter the serial number of your Lithiumate Touchscreen to view its data,
or click one of these buttons for a demo:
Data from OLD DATA