Vinci EV BMS modules For electric vehicle traction packs | |
|
A Battery Master and an Application Module are required for each battery.
|
VinciBus Master
|
|
A VinciBus Battery Master communicates with other modules through a 5-wire VinciBus.
|
Part number
|
Comm to slaves
|
Comm to super
|
|
3ME0000B
|
VinciBus
|
CAN
|
|
VinciBus Master
|
General specifications
Detailed specifications are in the Vinci BMS Manual.
|
A VinciLink Battery Master communicates with VinciLink Slaves through a 2-wire VinciLink.
The Battery Master communicates with an Application Module through a 5-wire VinciBus.
|
Part number
|
Comm to slaves
|
Comm to super
|
|
3ME0000K
|
VinciLink
|
CAN
|
|
VinciLink Master
|
General specifications
Detailed specifications are in the Vinci BMS Manual.
|
An Application module monitors battery voltage and current, drives contactors and tests isolation.
Multiple models are offered, for different voltage ranges.
|
Part number
|
Nominal voltage
|
|
3ME0017A
|
175 V
|
|
3ME0035A
|
350 V
|
|
3ME0070A
|
700 V
|
|
Application module
|
General specifications
Detailed specifications are in the Vinci BMS Manual.
|
Each battery requires a protector switch to turn off the battery current and a current sensor.
You may provide your own, or you may obtain one of these external protector switch kits from Elithion.
|
Part number
|
Current
|
Voltage
|
|
3SE1506C
|
150 A
|
600 V
|
|
3SE3006C
|
300 A
|
600 V
|
|
3SE3008C
|
300 A
|
800 V
|
|
3SE6006C
|
600 A
|
600 V
|
|
3SE9906C
|
1000 A
|
600 V
|
|
Protector switch
|
|
These external protector switch kits include:
Power circuits:
- Positive contactor
- Negative contactor
- Hall effect current sensor
|
Safety
- Mid-pack contactor
- Safety push-button
- Fuse
- Fuse holder
|
Precharge, post-discharge:
- Precharge relay
- Precharge resistor
- Post-discharge relay
- Post-discharge resistor
|
|
General specifications
Detailed specifications are in the Vinci BMS Manual.