Lithiumate Pro / HD Manual

Care and feeding of your Li-Ion BMS

• Index
• Quick
• 1: Plan
  • Selecting a charger
  • Dividing into banks
  • Current sensing
  • Wiring to system devices
    • DC motor controllers
      • Alltrax
      • Evnetics Soliton
      • NetGain Warp
      • SEVCON PowerPack
      • Zilla
    • AC motor inverters
      • Azure DMOC
      • Brusa
      • Curtis
      • Rinehart Motion AC
      • Siemens
      • UQM PowerPhase / HiTor
      • MES/CEBI TIM
      • TM4 Neuro & Motive
    • Chargers
      • Brusa
      • Current Ways
      • Curtis 1621
      • Delta Q
      • ElCon
      • Elektro Automatik
      • Eltek Valere
      • Manzanita micro
      • Zivan
    • Invergers
      • Magnum
• 2: Install
  • Controllers installation
    • Pro BMS Master
    • HD BMS Master
    • HD Harnesses
    • Local HVFE
    • Remote HVFE
  • Cell board installation
    • Small cylindrical, single
    • Small cyl, side-by-side, full
    • Small cyl, side-by-side, split
    • Small cyl, column, full
    • Small cyl,, column, split
    • Large cylindrical
    • Prismatic
    • Pouch, single
    • Pouch, multiple
    • Comm. harness
    • Shielded comm. cable
  • Balance Booster installation
  • Current sensor installation
    • In line
    • Cable mount, PRO
    • Cable mount, HD
  • SoC display installation
    • Open assembly, rectangular
    • Enclosed, round
    • Configurable
    • Touch-screen
  • RS232 Serial port communications
  • Lithiumate Wireless Advisor
• 3: Set-up
• 4: Test
  • HD Master test
• Reference
  • Description & specs
    • Functional description
    • Electrical specs
      • Lithiumate Pro Master
      • Lithiumate HD Master
      • Local High Voltage Front End (discontinued)
      • Remote High Voltage Front End
      • Lithiumate HD Master w/HVFE
      • Cell boards
      • Balance Booster
      • SoC Display
      • Configurable SoC Display
      • Touch-screen
    • Communications specs
      • BMS controller CAN bus specs
      • Remote High Voltage Front End CAN bus specs
      • SoC Display CAN bus specs
      • Configurable SoC Display CAN bus specs
      • RS232 serial port specs
    • Mechanical specs
      • Lithiumate Pro Master, board
      • Lithiumate Pro Master, encased
      • Lithiumate Pro Master w/HV F.E.
      • Lithiumate HD Master
      • HV Front End, board
      • HV Front End, encased
      • Large cylindrical cell boards
      • Pouch cell boards
      • Prismatic cell boards
      • Small cylindrical cell boards
      • Balance Booster
      • Rectangular SoC display
      • Round SoC display, open assembly
      • Round SoC display, enclosed
      • Touch-screen SoC display
    • Circuit diagram
  • User interface
    • Terminal emulator (RS232)
    • CAN
    • Android / Torque (CAN)
    • Graphics User Interface (RS232)
  • Menu reference
    • About
    • Status
    • Log
    • Set-up
      • Rev 2.xx
      • Rev 1.xx
      • Rev 0.xx
    • Password
    • Test
  • FAQ
  • Tools
  • Parts
  • Test fixtures
    • Cell board
  • Application notes
    • Current control methods
    • Lead Acid replacement
    • HVFE high current mod
    • Multi-temper. sense
    • Charge in parallel, discharge in series
    • Large / high voltage strings using an array of batteries in series
    • Turn on all balance loads
  • Software revisions
  • Tips
• Help
  • Support by remote access
  • Troubleshooting
  • Hardware factory testing
  • Reprogramming
• Forum, RSS