Vinci HV BMS, VinciNet topology

Description, configuration and ordering

back to top Description

The BMS uses a Master/Slave topology; the Battery Master communicates with its Slaves wirelessly through radio waves.

Cell sensing is wired: each slave senses the voltages of its cells through a number of tap wires.

Isolation is provided by the wireless link.

The BMS consists of:

Item Info Function Qty
VinciNet Battery Master Info Manage the battery 1
VinciNet Wired Slaves Info Interface to a bank of cells 1+
Application module Info Add high voltage stationary battery functions 1
Contactor set Info Precharge, disconnect the battery 1
Current sensors Info Sense the battery current 0~2
Cell wiring components Info Connection to the cells 1+
VinciBus wiring components Info Between master, appl. mod. 1
Communications adapters Info To a computer for monitoring (1)

To manage an array of batteries:

Item Info Function Qty
Array Master Info Manage the array 1
Block diagram
VinciNet topology

back to top System configuration and ordering

For spare parts, please contact us

 

In this page:
Description
Configuration
 
© 2008~2017 Elithion™, Inc.. All rights reserved. The Elithion brand and the logo with an 'ə' (upside down 'e') are Trademarks of Elithion Inc.
Policies - Contact us - Mobile site Page published on Oct 15 2017.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Pop-up enlargement